Silicon, Silicon Rubber, RTV Silicone manufacturer / supplier in China, offering Liquid Potting Silicone Rubber for LED with 55 Shore a Hardness, RTV Rubber for Plastic Products Molding, Silicone Rubber for Concrete Flower Pot Molds and so on.
|Min. Order / Reference FOB Price||200 kg||US $8.888/ kg|
|Production Capacity:||8 Tons Per Day|
|Payment Terms:||L/C, T/T, Western Union|
|Transport Package:||25kg/Drum and 200kg/Drum|
|Trademark:||Hong Ye silicone rubber|
Applications of RTV-2 liquid silicone rubber for Led Driver :
Mainly used in LED,PCB boards,power cord adhesion,cell pnones, power boxes,ultra-thin computers,digital cameras industry and so on. The main function of this kind of silicone is potting,seismic resistence and waterproof.
As for the application on LED,we should pay attention that we do not mean the LED lamp or LED display manufacturers,but the manufacturers who make electronic ballast and LED display module or other accessories.
Description of RTV-2 liquid silicone rubber for Led Driver :
Liquid silicone rubber for led driver is a kind of two components (1:1 mixing ratio) electronic potting silicone rubber.
HY9055 addition cured electronic potting silicone rubber with the Characteristics of heat-conducting,low viscosity ,
Inherent flame resistence,waterproofing,ect .It can be cured both at room temperature and heated temperature.
But the curing time can be accelerated by higher temperature.
Technical Parameters of RTV-2 liquid silicone rubber for Led Driver :
(Please note: the above data for this product in 25 °C temperature, 55 percent humidity)
A: Gray fluid
B: White fluid
Mixing Ratio cP
Pot life min
Curing time (25°C) min
Absolute degree Of dielectric
All kinds of color can be adjust by ourselves.
Technical guidelines of RTV-2 liquid silicone rubber for Led Driver :
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Mixing Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes. Then the mixture could be used for pouring.
4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick, then the curing time will be a little longer. The temperature also affects the curing time. When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.
Notes of RTV-2 liquid silicone rubber for Led Driver :
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
2. HY 9055 should be sealed storage. The mixture should be used up disposably to avoid causing waste.
3. HY 9055 belongs to non-dangerous goods, but keeps away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
RTV-2 liquid silicone rubber for Led Driver
available package is 5kg,20kg and 200kg containers.
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
The best service and competitive price silicone rubber ---HongYe silicone rubber here!
we listen,understand and act to meet our customers' needs,exactly.
we work to creat products,processes and technologies that meet environmental and social needs.
Do the best
That bring us up to be worldwide silicone rubber manufacturer leader.
By the way, we can provide techonocial support and share you the simple way to make molds ,improve effectiveness,reduce cost and then expand your business to a win-win cooperation!
1. Read the material safety data sheet(MSDS) before use.
2. Keep Out Of Reach Of Children.
3. Be careful. Use only with adequate ventilation. Contact with skin and eyes may cause irritation. Flush eyes with water for 15mins and seek immediate medical attention. Remove from skin with water-less hand cleaner followed by soap & water.
HY silicone was established in 1998 ,we manufacture all kind of silicone ,with the technical of more than 16 years silicone production, its with reliable production line and technology . With approval of RoHs , reach , FDA ,UL certificate . ect .
We will provide you the most suitable silicone for your application with the most professional technical service ,making your dreamed molds with the lowest cost and making your work most efficiently ,HY silicone is your best choice !
If you have any questions about our Liquid electronic potting silicone rubber for Led Driver ,pls feel free to contact LYDIA:
Mob: (00) 86-18988789546
Sample is available if required
1: Quality silicone perform at good quality with a competitive price
2: Free Sample for testing if you doubt about the quality.
3: Free technical support with professional R&D department in the silicone business for 16years.
1. 16 years experience in liquid silicone rubber
2. 10 years of golden memeber of alibaba
3. over 10 years of export history
4. visiting 5 countries at least every year.
5. Technical service and good aftersale service