Silicone, Silicone Rubber, Silicone Rubber for Mold Making manufacturer / supplier in China, offering Chocolate Making Silicone Rubber Liquid FDA Silicon Rubber, RTV Rubber for Plastic Products Molding, Silicone Rubber for Concrete Flower Pot Molds and so on.
|Purchase Qty. / Reference FOB Price|
|200-1,999 kilogram||US $13.55|
|2,000+ kilogram||US $10.9|
|Production Capacity:||8 Tons Per Day|
|Payment Terms:||T/T, Western Union, Paypal|
|Raw Material:||Natural Rubber|
Platinum cure food grade rtv silicone rubber for chocolate molds
Descriptions of Platinum cure food grade rtv silicone rubber for chocolate molds :
Platinum cure food grade rtv silicone rubber for chocolate molds is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1,mainly be suitable for making molds application.
Applications of Platinum cure food grade rtv silicone rubber for chocolate molds :
Platinum cure food grade rtv silicone rubber for chocolate molds could be mainly used for food mold , such as chocolate mold , cake mold , it is also used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding .
Advantages of Platinum cure food grade rtv silicone rubber for chocolate molds :
It is with low shrinkage (less than 0.1% ) ,high tensile and tear strength ,high copy times,easy for operation (mixing ratio at 1:1 /10:1),good fluidity easy for pouring operation ( in round 10000 cps )
, food grade with FDA(non toxic , no harm to human ).
Technique Data Sheet of silicone rubber:
Tensile strength (kgf/cm2)
Pot life/working time (mins)
Curing time/setting time (hrs)
Shrinkage rate (%)
Operation instruction of silicone rubber :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
More information , pls feel free to contact Mr. Lydia,