Electronic Potting Silicone (HY-9040)
Electronic Potting Silicone (HY-9040) application
Electronic Potting Silicone (HY-9040) Compounds, adhesive, coating materials, moistureproof, insulation, shockproof, flame retardant; Etc. Professional setting encapsulation for LED back to protect, belong to high transparent silicone high elastic rubber, potting electronic components
Electronic Potting Silicone (HY-9040) Instructions
Mix the component A and component B evenly according to the proportion, and can be poured after deaired the bubbles. The surface will cure in about 2 hours after pouring. Clean and dry the electronic element to be poured; The Electrical Potting and Encapsulating compunds should be deaired the bubbles after pouring at the room temperature.
Electronic Potting Silicone (HY-9040) features
Electronic Potting silicones has sticky viscosity, low shrinkage and non-corrosive.
The Electronic Potting and Encapsulating Compounds can be used for a long period at the temperature of -60~300 centigrade degree with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.
Electronic Potting Silicone (HY-9040) has excellent resistance to high temperature performance, Electronic insulation properties, performance, good flexibility, with detachable, seal components remoable repair and replacement, then use the pouring sealant was tinker can trace.
Electronic Potting Silicone (HY-9040) Modle Code
HY-9040 Circuit board potting silicone rubber is two-component room temperature vulcanization silicone rubber, which has low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance.
Notice of Electronic Potting Silicone (HY-9040)
1. Free sample is avalible
2. Reach certificate is avalible
3. MSDS, RHOS, GSG are avalible
4.1kg/tin, 5kg/tin are avalible
Any question, please feel free to contact us.
|Before Curing||Appearence||A: Dark gray fluid|
B: White fluid liquid
|Viscosisty cP||A: 3000±500|
|Mixing Ratio cP||2500~3500|
|Pot life min||120|
|Curing time (25C) min||480|
|Curing time (80C)min||20|
|After Curing||Hardness(Shore (Shore A)||40±2|